nmmp
mmpphoto

Standard features include :
  -  Nitrided armatures for long life.
  -  Fully encapsulated coils for durability.
  -  Fast-release brake armatures for accurate registration.
  -  Friction materials carefully chosen for torque and long life.
  -  Wiring that meets CSA standards.


The MMP clutch/brake module comes preassembled and preadjusted, and combines a clutch and a brake on a split shaft. This foot-mounted module has a female input flange that make it possible to mount an I.E.C. standard motor directly to the input of the clutch/brake.

The double-bearing-supported output shaft is suitable for parallel-shaft drives or for mounting a flexible coupling. The drip-proof housing is made of a light alloy;  all bearings are sealed. These units are suitable for high- cycle-rate applications.

Drawing :
01287.gif (9801 bytes)

Specification : (Dimensions in mm)

SIZE

 0.6 1.2 2.5 5 10 20
  Static Torque        kgm 0.55 1.1 2.2 4.5 9 17
  Exciting Voltage  DC-V 24 24 24 24 24 24
  Capacity (at 20 ºC)   W 11 15 20 25 35 45
 Input Bore Dia.      dH7 11 14 19 24 28 38
Keyway bxt 4x12.5 5x16 6x21.5 8x27 8x31 10x41.5
Output Shaft Dia.     d1j6 11 14 19 24 28 38
Keyway  b1xt1 4x12.5 5x16 5x21 7x27 7x31 10x41.5
Diameter A 90 110 140 175 200 240
B 60 80 105 135 155 195
C +0/-0.5 65 80 90 112 132 160
D 100 125 150 190 230 290
D1 160 160 200 200 250 300
E 130 130 165 165 215 265
FH7 110 110 130 130 180 230
G 10 12 15 15 18 20
H 13.5 15 20 24 28 28
I 6.5 9 11 11 14 14
J M8 M8 M10 M10 M12 M12
J1 M4 M4 M6 M6 M6 M10
K 27.5 32 35 35 45 47
Length L 170 206 255 326 430 536
M 105 130 160 185 230 270
N 90 110 135 160 200 240
P 52.5 63 80 108 145 188
R 27 32 42 52 62 82
S 5 5 5 5 6 6
T 25 30 40 50 60 80
Weight                  kg 2.8 5.5 9.4 16 28 52